Skip to content
AbriuPT, ver esta página em portuguêsDiscover Abriu
Drawing of a DIN rail interface relay, with its coil and screw terminals.

Any brand

12 or 24 V interface relay

Only when the gate's control board has no signal-light output: it links the gate's sensor to the Shelly at low voltage.

Brand
Any brand
Model
Relé de interface 12V (ou 24V) com contato 250V

Where to buy

The stores' links are coming soon. Meanwhile, search for the exact model: Relé de interface 12V (ou 24V) com contato 250V.

Prices and availability are the store's at the time of purchase. The stores are Brazilian. Some links on this page are affiliate links: if you buy on Amazon or Mercado Livre through them, the store pays Abriu a commission, at no extra cost to you. As an Amazon Associate, Abriu earns from qualifying purchases.

What it does with Abriu

  • Carries the state of the gate's reed sensor to the Shelly without running 127/220 V to the track.

Before you buy

  • Coil at the voltage of the board's accessory output (12 or 24 V) and a contact rated for 250 V.
  • Not needed when the board has a signal-light output: the Shelly reads the state straight from it.

To install it

Without a signal-light output, in the installation guide
Drawing of a small, square Shelly relay, with its screw terminals.

Shelly

Shelly 1 Mini Gen4 relay

The relay that opens the garage gate from the dashboard and the app, and shows whether it was left open.

All the equipment